Product Introduction:

AR Glass fiber mat is alkali-resistant (AR) and, therefore, right for processing with concrete. It is normally used in the laminating technique, either during lamination into a negative form or when positive laminating any form. It is manufactured by chopping AR Glass Roving into 20-50mm strands and forming them into a mat with a suitable binder.

The ARG mat is easily penetrated by cement mortar. The engineered binder, which dissolves further with water, assists incorporation into a cement matrix.


  • Type of glass:             AR

  • Area Weight(g/㎡):    150, 225, 300

  • Width (mm):               1000

  • ZrO2 Content %:        ≥16.7

Product Benefits:

  • Alkali resistance

  • Easy penetration by cement mortar

  • Higher strength but lighter weight

  • Good mechanical performance


It is mostly used as a positioned reinforcement flooring system, as well as utilized as construction and building materials such as cement boards, gypsum boards, and insulation panels.


AR Glass Fiber Mat should be stored in a dry and ventilated area. It should be kept away from direct sunlight and moisture to prevent damage to the fibers. The storage temperature range is 15 to 35 degrees Celsius. The environment's relative humidity ranges from 35% to 65%. It is recommended to hold the item in the workshop for 24 hours before usage if it is stored below 15°C.


Q: What is the regular area weight?

A: AR Glass Mat of 150g/m2 is our regular product.

Q: Is AR Glass Fiber Mat suitable for outdoor applications?

A: Yes, AR Glass Fiber Mat is resistant to alkali and corrosion, making it an ideal reinforcement material for outdoor applications.

Q: Can AR Glass Fiber Mat be customized according to specific requirements?

A: Yes, AR Glass Fiber Mat can be tailored to specific sizes, thicknesses, and applications, depending on the customer's requirements.

AR Glass Fiber Mat

AR Glass fiber mat is alkali-resistant (AR) and, therefore, right for processing with concrete.